medical wheelchair

Medical wheel chairs product introduction

The seat is tilted 20° and the backrest is tilted 30°

Equipped with padded seat and backrest for a more comfortable ride

The headrest can be removed as needed

Equipped with a removable lifting leg rest

8-inch PU front wheel

24-inch rear spoke wheel with PU tire

Equipped with an adjustable anti-rollover device to further ensure safety

Medical wheel chairs process introduction

HY adopts precision stamping technology to improve the guiding accuracy of the punch press and the mold, reduce the matching clearance of the concave and convex molds, and cooperate with other processing measures to achieve precision stamping, and obtain precision stamping parts with higher size and surface roughness than ordinary stamping.

Advantages of precision stamping

High precision: The advantage of precision stamping is that it has higher precision, which increases the accuracy of the product and the surface roughness of the punching section, and can effectively improve the accuracy of medical wheel chairs and other diagnostic medical or surgical instruments, which directly affects the quality and service life of the product.

Good consistency: The precision stamping mold uses special materials and heat treatment technology. The parts of the processed medical wheel chairs have higher dimensional accuracy and longer service life. According to the comparison of past processing data, the service life of precision molds can even exceed ten times that of ordinary molds, and the output accuracy error of parts is smaller, which can effectively improve the efficiency of subsequent quality inspection and final assembly, and the product quality is higher.

Higher efficiency: Due to the higher dimensional accuracy of precision stamping parts, this greatly reduces the subsequent finishing process of medical wheel chairs, effectively saves processing time, and has a shorter production cycle, which can meet the rapid changes and needs of the medical device market.

How to use medical wheelchair

1. Before riding the wheelchair, first stand up the footboard, sit firmly and flatten the footboard, then fasten the seat belt, and move the handwheel forward or backward with both hands at the same time to make the passenger move forward or backward.

2. Adjust the handwheel appropriately during the process of moving, and you can get any angle. When the high-back wheelchair needs to adjust the back angle during the use of the original place, the two rear brackets must be supported before use.

3. If there is no guardian to watch over you during the journey, please do not adjust the backrest angle without authorization to avoid accidents.

Maintenance of medical wheelchair:

Keep the body clean and place it in a dry and ventilated place to prevent rust;

The rotating parts of the wheelchair need to be lubricated with a small amount of lubricating oil during maintenance to maintain good performance;

The tires must maintain sufficient air pressure and avoid direct contact with oil, acid and high temperature heat sources to prevent aging and deterioration.

Why choose HY

HY focuses on providing high-quality precision parts and professional sales and after-sales services for high-end medical care equipment, integrating cutting-edge automation technology and precision mechanical design, and using advanced stamping technology. It can achieve high-precision stamping operations at the micron level, ensuring that each stamping reaches the ultimate precision and consistency. The product stamping accuracy can reach ±0.01mm, meeting the most stringent medical standards and safety requirements.